Press Releases
March 31, 2017
ISOPur Releases Newly Designed HR-Series Filters
ISOPur® Fluid Technologies, Inc. releases their redesigned HR Series units. The new
HR01 unit features a smaller footprint for tight spaces and a newly designed CMU allowing for 50% increase in processing capabilities, drawing down varnishes at a quicker rate and reducing dwell time of oxidative byproduct and wear material in the oil.
April 24, 2015
ISOPur Fluid Technologies, Inc. releases their new Alliance Varnish Removal purification system for small hydraulic systems at Noria’s Reliable Plant exhibition in Louisville, KY.
June 3, 2014
ISOPur Balance Charge Agglomeration Technology Patent Extended through November 2030
Featuring increased charging surface area, extended dwell time and improved charge inducing geometry, the US Patent Office extends the patent on ISOPur’s varnish mitigating BCA® Technology.
October 2013
ISOPur’s® Fluid Technologies, Inc. introduces Offshore IECEx Hazardous Location option on their MR and LR50 Systems.
Expanded on their ATEX and NFPA Purge and NEMA 7 Systems ISOPur adds IECEx Flame Proof to their hazardous location offering. Please contact ISOPur or your local rep to select the proper ISOPur Purification System for your Hazardous Location needs.
May 2012
Polk Power Station, Florida utilizes ISOPur’s BCA® technology and new oil chemistry to effectively control the varnish that was affecting servo valves.
February 2012
The January – February edition of Turbomachinery Magazine has an article, based on a paper presented at PowerGen Asia 2011 by Ray Gomes, the CEO of ISOPur. The article is about our documented success at extending oil life and improving operations at a Large US power plant. The oil at this plant is ten years old and it is cleaner than new oil. This plant represents only seven turbines of the more than a thousand turbines using BCA technology provided by ISOPur to mitigate varnish, reduce wear and extend oil life.
October 2011
At the 2011 PowerGen Asia exhibition in Kuala Lumpur, Isopur presented a paper on the long term results of using BCA technology on GE frame 7 turbines. Seven turbines in the southeast USA have been running more than 50,000 hours on the original load of lubricating oil. We believe this is a record for a GE turbine with group 2 lube oil.
The oil chemistry had been followed since 2005 when the first ISOPur machines were installed. Over that time, varnish levels have fallen to the level of new oil. Contamination levels are much lower than new oil, and the remaining useful life is averaging 70%, based on RPVOT testing. This oil may last over fifteen years, and possibly much more.
March 2010
Maersk Arun Trial for ISOPur Agglomerator
Ray Gomes, the CEO of ISOPur traveled between the toe of Italy and Varna Bulgaria aboard the container ship Maersk Arun to test the performance of an agglomerator on an auxiliary diesel generator. Preliminary results indicate success at removing carbon from the lubricating oil.